Wire Mesh Panel Fence Welding Machine Dp-Fp-2500A

Wire Mesh Panel Fence Welding Machine Dp-Fp-2500A

Wire Mesh Panel Fence Welding Device DP-FP-2500A

Mesh welding equipment collection:

Reinforcing mesh welding equipment, fence mesh welding machine, animal cage welding machine, steel grating welding equipment, roll mesh welding equipment, wedged wire display screen welding device, wire straightening and chopping device and so on.

Mesh weaving equipment series:

Chain hyperlink fence machine, barbed wire device, nail creating machine, wire drawing device, expanded metallic mesh machine, expanded steel device, gabion mesh equipment, hexagonal wire mesh device, crimped mesh device and many others.

Parameter of machine 

Design  DP-FP-2500A  Wire diameter  2.5-6mm/three-5mm
 Line wire room  50-300mm  Cross wire place  25/twelve.5mm-300mm
 Width of mesh  Max.two.5m  Length of mesh  Max.6m
 Welding electrodes  48pcs  Welding speed  50-seventy five occasions/min
 Rated electrical energy  125kva*6pcs  Needed energy  Min.160kva
 Weight  4.2T  Overall measurement  5.4m*3.two*one.7m

Specifics of machine 

Main technologies 

     1.The manage panel is much more intelligent, quite straightforward to work. (Panasonic PLC plan)

     2.The longitude wires ought to be inserted into slot tunnels (cast iron material), ideal for diverse diameter.

     3.The cross wires are fed from cross wire feeder, managed by phase motor and SMC (Japan) air cylinder.

     4.Pure purple copper (higher) and chromised bronze (decrease), resilient.

     5.Clutch motor and helical gear reducer link the principal axis immediately, welding secure.

     6.Casting water-cooling welding transformers, higher efficiency. The welding degree is modified by PLC.

     7.Panasonic (Japan) servo motor+planetary reducer and SMC (Japan) air cylinders for pulling mesh.

     8.The cable drag chain is Igus model, imported from Germany, not effortlessly cling down.

Wire feeding way

      The longitude wires and cross wires should be pre-straightened and pre-cut.

      1.The longitude wires are inserted into the slot tunnels manually.

      2.The cross wire are place into the cross wire feeder, which is managed by phase motor&SMC (Japan) air cylinders,automated slipping.

Loading & delivery

Contact us 
Income:Elaine Lu
Fb account: ElaineLu357622


Wire Mesh Panel Fence Welding Machine Dp-Fp-2500A