We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Solution introduction

5406-08-06 EPT Adapter Reducer Bushing Fitting

Technical Assistance
QC Hydraulics engineering has the capability to layout drawings conform to SAE, BS, JIS, DIN & ISO technical specs. And we can also make according to customers’ drawings or samples.

Relevant Products 

Materials Te EPT Certification(EN15714/3.1)
We can offer the M EPT for each cargo.

Production Process

Package deal and Shipping

Our Certification
QC Hydraulics has been granted ISO 9001:2015 & S EPT certificates for processing stainless steel hydraulic hose fittings and adapters.

Why Choose Us?

one. History:
QC Hydraulics is an ISO 9001:2015 qualified maker with in excess of twenty year’s manufacturing expertise, specializing in hydraulic hose fittings and adapters. We only concentrate stainless steel materials, no carbon metal or brass.

two. Product range, reliable quality:

one. EPT Hose Fittings
one). 43 Series Crimp Hose Fittings/Couplings
2).  EPT Series Crimp Hose Fittings/Couplings
three). BW Sequence Crimp Hose Fittings/Couplings
four). Stainless Metal Hose Ferrule For SAE 100R 1AT, 2AT Hose
five). Stainless Metal Feminine JIC seventy four Diploma Flare Hose Fitting
six). Stainless Steel Woman B EPT 60 Diploma Cone Hose Fitting
7). Stainless Steel B EPT Male 60 Degree Cone Seat Hose Fitting
eight). Stainless Steel Woman B EPT 60 Diploma Cone 90 Elbow Hose Fitting
nine). Stainless Metal NPT Male Hose Fitting

two. EPT Adaptors
one). NPT Pipe Thread Adapters
2). O-ring Boss SAE/ EPT Adapters
3). JIC 37 Degree Flare Adapters
4). NPSM Pipe Thread (female swivel) Adapters
five). O-ring Encounter Seal (ORFS) Adapters
6). BSPP/BSPT Adapters

3. Stainless DIN Metric Tube Fittings
four. Stainless reusable hose fittings
five. Low pressure stainless metal press on hose ends and hose barbs

3. Good quality Handle Of Uncooked Material:

one. We only choose the highe EPT good quality stainless steel raw content. And metallic suppliers supply substance te EPT certificates for each cargo.
2. We one hundred% evaluate the measurements of bar inventory and forging blanks by callipers for every single cargo.
three. We use the Moveable XRF Analyser to te EPT the crucial chemical components of bar stock and forging blanks with 10% for every shipment(Important chemical aspects include Cr, Ni, Mo, these chemical factors are extremely essential for the corrosion overall performance) 
four. In addition to, we randomly pick up numerous of reducing items to do even more chemical evaluation by spectrograph each ten days to make positive the uncooked material a hundred% qualified.

four. High quality Handle Of Creation Procedure:
one. We are using Sigma Large-Precision CNC Lathe Machines to manufacture stainless steel hose fittings and adapters.
The characteristics of CNC Lathe Equipment:
1). Dual-axis, EPT method
two). Thread slicing resources: EPT Japan, vargus & carmex Israel(Have a quite steady efficiency for the duration of machining)

2. We use  callipers to evaluate the simple sizes. And we use  the thread gages to examine the threads.

3. We use Contracer & Contour Measuring Devices to examine the very small angles and diameters.

five. Inspection:
1. Fir EPT Post Inspection During Procedure
1).The operator make the fir EPT article according to producing drawings. 
2). The operator will examine the fir EPT report and record. If the sizes and threads satisfy the production drawings, and then the fir EPT report will be put in a particular box( the box is for fir EPT report only).
3). Workshop foreman will take second inspection for the fir EPT write-up.
four). Only passing the inspection by workshop foreman, and then commence with mass manufacturing.

two. Mass Manufacturing After Fir EPT Post Inspection
1).Soon after the fir EPT post accredited by operator and workshop foreman, and then start off with mass generation.
2). During mass generation, the operator needs to inspect the threads every single ten parts, and measure the sizes each fifteen pieces. As soon as any fittings of threads and dimensions out of the specs, all this batch of fittings will be inspected comple tel: +86~thirteen 0571 88828y.
three). The qualified fittings will be fitly set in a plastic box piece by piece.
4). Finally, the concluded fittings will be transported to inspection section for last inspection.

three. Ultimate Inspection
1). Appearance: a hundred% inspection below robust gentle. No scratch, No burr.
2). Key dimensions and angles: 15-20% randomly inspection by callipers and contracer. Once any dimensions and angles of fittings out of specs or will not regard to drawings, this batch of fittings will be pressured to return back again to creation workshop to increase or make a new substitute.
three).Threads: 15-twenty% randomly inspection by right gages. When any threads out of specs or doesn’t respect to drawings, this batch of fittings will be compelled to return back to generation workshop to improve or make a new alternative.

6. Following Service:
When customers have any issues about our goods,  we will take a fast action.
We can one hundred% make a new replacement for free of charge when the shopper has a criticism about our items.

Our Exhibition

FAQ

Q: Are you a buying and selling firm or producer?
A: We are a 100% manufacturer, primary goods protect stainless metal hydraulic hose fittings and stainless metal hydraulic adapters.

Q: Do you have stock?
A: Currently we made to get, but we do have some shares for common kind uncooked supplies. So we can make a quick action for some urgent orders.

Q: Do you have a MOQ request?
A: Normally our MOQ is two hundred pieces. But for some greater dimensions, 50 or a hundred items is also acceptable for the fir EPT get.

Q: How about your payment technique?
A: 30% deposit in progress, the stability payment once more EPT the duplicate of Invoice of lading. Of course, I consider almost everything is negotiable.

Q: What about your delivery time?
A: About forty five days for frequent orders. But it is dependent on the buy quantity. Of system, if you have an urgent buy, we will consider be EPT to satisfy you.

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the listed substitute parts contained herein are not sponsored, authorized, or created by the OEM.