Product Description
A Series Short pitch Precision Simplex Roller Chains & Bush Chains
| ISO/ANSI/ DIN Chain No. |
China Chain No. |
Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
| Lmax mm |
Lcmax mm |
|||||||||||
| 15 | *03C | 4.7625 | 2.48 | 2.38 | 1.62 | 6.10 | 6.90 | 4.30 | 0.60 | 1.80/409 | 2.0 | 0.08 |
*Bush chain:d1 in the table indicates the external diameter of the bush
ROLLER CHAIN
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.
CONSTRUCTION OF THE CHAIN
Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CHINAMFG which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.
The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.
LUBRICATION
Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]
There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.
Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.
VARIANTS DESIGN
Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.
Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.
Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.
USE
An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.
Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.
WEAR
The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).
With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.
The lengthening due to wear of a chain is calculated by the following formula:
M = the length of a number of links measured
S = the number of links measured
P = Pitch
In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.
CHAIN STRENGTH
The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.
The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.
CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Polishing |
| Samples: |
US$ 3/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can roller chains be used for overhead or inverted applications?
Roller chains can be used for overhead or inverted applications, but there are certain considerations to keep in mind. Here’s a detailed answer to the question:
1. Lubrication: In overhead or inverted applications, proper lubrication is crucial to ensure smooth operation and prevent premature wear. Gravity can affect the distribution of lubricant within the chain, so it’s important to use a lubrication method that can effectively reach all the critical components.
2. Tensioning: In overhead or inverted applications, the tensioning of the roller chain becomes even more important. The chain should be properly tensioned to prevent sagging or excessive slack, which can lead to uneven load distribution, chain skipping, or disengagement from the sprockets.
3. Environmental Considerations: Overhead or inverted applications may expose the roller chain to environmental factors such as dust, debris, moisture, or temperature variations. It’s important to select a roller chain that is designed to withstand the specific environmental conditions and provides adequate protection against corrosion, contamination, and wear.
4. Sprocket Alignment: Proper sprocket alignment is critical for the smooth operation of roller chains in overhead or inverted applications. Misalignment can result in chain binding, increased friction, and premature wear. Regular inspection and adjustment of the sprocket alignment are necessary to maintain optimal performance.
5. Chain Design: Depending on the specific requirements of the overhead or inverted application, specialized roller chain designs may be available. These designs may include features such as sealed joints, self-lubricating capabilities, or corrosion-resistant coatings to enhance performance and reliability in such applications.
By considering these factors and selecting a roller chain specifically designed for overhead or inverted applications, it is possible to achieve reliable and efficient power transmission in these challenging orientations.
What are the benefits of using a roller chain in material handling systems?
Roller chains offer several benefits when used in material handling systems. Here’s a detailed answer to the question:
1. High Load Capacity: Roller chains are designed to handle heavy loads. They have the strength and durability to support the weight of materials being transported in material handling systems. The multiple contact points provided by the rollers distribute the load evenly, reducing stress concentrations and ensuring efficient load carrying.
2. Reliable Power Transmission: Roller chains provide reliable power transmission in material handling systems. They efficiently transfer power from the motor to the moving components, such as conveyors, lifts, and sorting systems. The precision engineering of roller chains ensures smooth and consistent power transfer, minimizing slippage and maximizing operational efficiency.
3. Flexibility and Versatility: Roller chains are available in various sizes, pitches, and configurations, offering flexibility in design and application. They can be easily adapted to different material handling system layouts and requirements. Roller chains can accommodate both horizontal and vertical movements, making them suitable for a wide range of material handling applications.
4. Durability and Longevity: Roller chains are known for their durability and resistance to wear. They are designed to withstand the demanding operating conditions typically encountered in material handling systems, such as high speeds, heavy loads, and exposure to dust, debris, and contaminants. Proper lubrication and maintenance can further enhance their longevity and reliability.
5. Easy Maintenance: Roller chains are relatively easy to maintain. Regular lubrication and periodic inspection can help ensure smooth operation and detect any signs of wear or damage. Chain tension can be easily adjusted to maintain optimal performance. In the event of chain wear or failure, individual chain links can be replaced, minimizing downtime and maintenance costs.
6. Cost-Effective Solution: Roller chains offer a cost-effective solution for power transmission in material handling systems. They are generally more affordable compared to alternative systems such as belts or gears. Additionally, their durability and longevity reduce the need for frequent replacements, resulting in cost savings over the system’s lifespan.
When selecting a roller chain for a material handling system, factors such as load capacity, speed, environmental conditions, and specific application requirements should be considered. Regular maintenance and inspection are essential to ensure optimal performance and to identify any potential issues that may require attention.
What are the signs of roller chain wear and when should it be replaced?
Roller chain wear is a natural occurrence due to the repetitive motion and load-bearing nature of the chain. Recognizing the signs of wear is important to ensure the safe and efficient operation of the chain. Here’s a detailed answer to the question:
1. Elongation: Roller chains can elongate over time due to wear on the pins, bushings, and rollers. To check for elongation, measure the distance between a specific number of links (e.g., 10 or 12) over a known length. If the measured distance exceeds the standard pitch length, it indicates chain elongation and the need for replacement.
2. Chain Slack: Excessive chain slack or sag is another sign of wear. When the chain becomes elongated, it fails to maintain the proper tension, resulting in increased slack. Excessive chain slack can cause poor engagement with sprockets, resulting in skipping or jumping and affecting the overall performance of the chain.
3. Misalignment: As a roller chain wears, it may start to misalign with the sprockets. This misalignment can cause the chain to ride unevenly on the sprocket teeth, leading to accelerated wear on the chain and sprockets. If you notice the chain consistently riding to one side of the sprocket, it may be a sign of wear and misalignment.
4. Chain Noise: Worn roller chains can produce increased noise during operation. Excessive wear on the chain components can cause rattling, clicking, or grinding sounds. Unusual noises should be investigated, as they may indicate significant wear or damage to the chain.
5. Visible Signs of Wear: Inspect the chain visually for signs of wear, such as rust, discoloration, or visible damage to the rollers, pins, or bushings. Excessive wear on these components can affect the chain’s ability to properly engage with the sprockets and transmit power efficiently.
When to replace a roller chain depends on various factors, including the severity of wear, the criticality of the application, and the manufacturer’s recommendations. It is generally recommended to replace a roller chain when it has elongated beyond the allowable limits, exhibits excessive wear, or shows signs of damage that can compromise its performance and safety.
Regular inspection and maintenance of roller chains are essential to identify signs of wear and ensure timely replacement. Replacing the chain at the appropriate time helps prevent unexpected failures, reduces downtime, and maintains the overall efficiency of the machinery or equipment.
editor by CX 2023-09-18
China 14MM VVS Moissanite Iced Out Diamond Gold Color Chain Necklace 925 Sterling Silver Men Necklace Miami Zirconia Cuban Link Chain roller chain belt
Jewelry Main Content: silver
Materials Variety: 925 Sterling Silver
Gender: Unisex, Women’s, Children’s
Major Stone: Moissanite
Jewelry Sort: NECKLACES
Necklaces Type: Pendant Necklaces
Situation: Anniversary, Engagement, Present, Marriage, Aggressive Drive Shaft C.V. Joint 662144 Automotive Manufacturing unit Producer Automobile Spare Elements for Mazda Get together, Other
Certification Sort: GRA
Chain Sort: Link Chain
Plating: Silver Plated, Gold Plated, Rhodium Plated, Rose Gold Plated, Platinum Plated, C86 Generate Shaft Assembly Compatible with Polaris 280180360 Pool Cleaners Areas Black Rhodium, 18K Gold Plated
Type: Fashionable
Inlay technological innovation: Wax Placing
Substance: 925 Sterling Sliver
MOQ: 1pc
OEM/ODM: Welcomed
Key word: Pendant Necklace
Packing: opp Bag
Jewelry Identify: Dylam Jewellery
Brand: Dylam
Plating color: Silver Plated
Shipping and delivery time: 3-7 Operating Days
Shipping and delivery: DHL FedEx UPS EMS TNT
Packaging Information: 1-Each and every computer of products be packed with little opp bag 1st, then all of merchandise in 1 item packed with large opp bag, at last in 1 carton. 2-We can settle for your need for deal.
Merchandise Description
| Plated | Silver/Gold/Rose Gold/Personalized | ||||||
| Length | Accept Tailored | ||||||
| Materials | Accept Custom-made | ||||||
| OEM/ODM | Accept | ||||||
Advantages and disadvantages of roller chains
If you need to lift heavy objects, you should know how to use a roller chain. Its simple design and simplicity make it ideal for a wide range of applications. This article will discuss the advantages and different types of applications of roller chains. After reading this article, you will be able to choose the type of roller chain that best suits your specific needs. In the next section, we’ll discuss how to deal with it.
Put on
How to measure the wear of a roller chain? There are several methods available, but the most accurate is to use a wear gauge kit. The CZPT Chain Wear Indicator Kit measures chain elongation. Compliant with ANSI and British Standards, this tool is critical to the industry chain and can help you determine when replacement is required. Improper chain maintenance can cause equipment to slip or perform poorly, resulting in unnecessary downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement represents the ANSI #80 standard for roller chains. Vernier calipers can also be used to measure the pitch of chains. This tool is very useful and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can determine if the roller chain needs to be replaced.
The wear resistance of a roller chain can extend its life by 10% or more. However, proper lubrication and general maintenance are essential to ensure the longest lifespan of your chain. The manufacturing process of a roller chain assembly also plays a crucial role in determining its service life. For longer life, you might consider purchasing a heavy-duty series roller chain with thicker side plates and longer pins. If you need greater working load capacity, you can also consider heavy-duty chains.
High-quality components are critical to the longevity of the roller chain. High-quality roller chain components require precise heat treatment processes. The use of proprietary steel allows the company to manufacture more durable drums. The pins are manufactured to tight tolerances and then undergo a centerless grinding process. This process removes any surface defects, resulting in a mirror finish on the pins. The uniformity of this surface finish also ensures that the load is evenly distributed on the pins, extending the life of the chain.
Material
Among the materials used in roller chains, carbon steel and alloy steel are the most common. However, stainless steel is used in food processing equipment and applications that require lubrication. Other materials used for roller chains include nylon and brass. For more information, see the USACE Material Specification Sheet for more information. You can also find information about the performance of a roller chain by its design. But before choosing one of these materials, consider its pros and cons.
Stainless steel is an excellent choice for roller chains. It is corrosion-resistant and can operate in extreme temperatures without cracking. Stainless steel is a non-magnetic material that can operate in a temperature range of -200 degrees to +700 degrees Fahrenheit. In addition to its corrosion-resistant properties, stainless steel can withstand a variety of environments and can be used in heavy-duty applications. The MEGA series is the strongest stainless steel roller chain in the world.
Application
As the name suggests, a roller chain has 5 basic components: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum performance and durability. Typical applications include drives and conveyor belts. The various components of the roller chain can be customized to specific needs. Read on to learn more about how these parts work together. This article presents the advantages and disadvantages of different types of roller chains and discusses their applications.
A roller chain is a form of chain drive consisting of short cylindrical rollers connected together by side links and gears called sprockets. While these devices are simple, they have some limitations. In most cases, sprockets must be designed with a maximum tensile load on one tooth to prevent premature chain failure. Therefore, these chains are less efficient than belt drives with higher inertia.
Roller chains are usually made of carbon or alloy steel, although stainless steel is often used where food processing machinery and lubrication are problematic. Sometimes, nylon and brass are used. The maximum running speed of the roller chain is important for some applications, but it also provides economic benefits for users and manufacturers. The maximum running speed of a roller chain is usually governed by a wear limit, which can vary by application.
The global roller chain market is expected to grow at a CAGR of over 5.4% over the next six years. The research report covers the competitive landscape and key factors influencing the market. The report also analyzes the growth potential, product utilization, and pricing models of key vendors. It also covers the SWOT analysis of the key players in the industry. The study provides a comprehensive market analysis of all these factors and more. It also highlights key players and their strategies and identifies the fastest growing regions for their products and services.
Maintain
Because rollers are exposed to a variety of environments, including snow, rain, and muddy roads, regular maintenance is required to prevent damage. Because they must encounter these elements frequently, frequent inspections are important to prevent rust and other damage. Also, avoid pouring acidic or alkaline cleaning products on the roller chain. Instead, use hot water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain directly with water has little effect.
For small rollers, the workload during the break-in period should not be too large, otherwise, it will cause overheating. The small drum should also be inspected frequently for any unusual appearance, which may indicate that the system is not functioning properly. In this case, the operation must be suspended. Failure to do so could result in serious injury or a facility fire. Additionally, a properly lubricated roller chain is essential to ensure long-term performance.
The surface of the roller is often rusted and scratched. Over time, these little scars can spread to the drive, damaging it. Also, the chain may not be properly spaced and timed. Therefore, it is very important to check regularly to ensure that the chain is in top condition. When the chain wears to 3% or more, the entire roller chain needs to be replaced. Failure to do so may damage the drive, the roller sprocket, or the entire chain.
Given the chain’s processing environment, lubrication is critical to its performance. If the chain is lubricated, it must be re-lubricated frequently. However, lubricated roller chains are susceptible to contamination, especially in the biomass industry. In these environments, airborne organic particles and debris from the biomass industry can contaminate lubricated roller chains. This is why maintenance is important for lubricating roller chains.
Preloading
The benefits of preloading roller chains are well documented. In general, preloading eliminates the initial elongation of the roller chain, increasing its service life. Preloading is an effective way to achieve this, and a preloading chart can help illustrate the benefits of this process. Chains with little or no preload will stretch significantly during drive start, while chains will stretch rapidly as the surface hardness of the wear parts increases. Additionally, a properly preloaded chain has little or no elongation during the initial start-up of the drive, extending wear life.
Premium manufacturers apply the preload concept during their production phase, aligning all major components at the same time. This approach helps eliminate elongation issues that lead to rapid degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To avoid these problems, it is important to purchase a high-quality preloaded roller chain from a reputable source.
The heat treatment process is an effective way to prevent excessive wear of the roller chain. Heat treatment is a complex process that takes place in a factory during manufacturing. This process helps the rollers maintain high hardness and depth, preventing breakage. When buying a roller chain, make sure that the chain is heat treated and that the chain is manufactured to a high degree of precision. It also ensures that the product can be used for a long time.
In addition to performance benefits, preloading can also reduce initial elongation. A preloaded roller chain will exhibit near linear elongation, whereas a non-preloaded chain will experience rapid elongation. Therefore, they will reach the recommended 3% elongation earlier. Make sure the chain is properly lubricated. Also, consider how the chain is arranged. This is critical for optimal longevity.
editor by Cx 2023-07-04
China supplier G30 G43 CZPT G100 Welded Chain with Diameter D2mm-D68mm roller chain belt
Item Description
OUR Items
G30 G43 CZPT G100 welded chain with diameter D2mm-D68mm
Our Providers
1. Prompt reply for inquiry within 24 hours
2. One on one service guarantees you the best purchasing experience.
3. Strong production capacity and professional technological engineer can gusrantee the shipping and delivery time and good quality.
4. Strict good quality handle.
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Polishing |
| Feature: | Rust-Resisting Material |
| Chain Size: | D3mm-D64mm |
| Structure: | Welded Chain |
| Samples: |
US$ 150/Ton
1 Ton(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
drive chain type
Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.
time chain
There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.
pin chain
Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.
Engineering Steel Chain
Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.
Bushing Roller Chain
Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
flat top chain
The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.
editor by CX 2023-04-13
china sales Brand New OEM Belt Chain Timing 2.5L 16V Dohc Fusion Ranger 2005-12 1L5z-6268-AA manufacturers
Item Description
We have All CZPT Parts for CZPT ,The united states,German, and Japan Cars, and also collection areas for distinct vehicles.
Substantial high quality merchandise First, Created in ZheJiang , Manufactured in CZPT Mainland, 6000+ sq. meters warehouse, a lot of areas in stock.
Make sure you really feel free of charge to make contact with and know more.
Informations
| 1.Item Identify: | Timing Chain |
| 2.OEM.NO.: | L301-12-201 1L5Z6268AA 1L5G6268AB |
| three.Suitable for: | MAZDA GH 2.5L FORD Ranger MONDEO 2.3L |
| four. Delivery Time: | Typically In 1-fifteen times following deposit or as CZPT ers’ requirement, count on stock |
| five.Positive aspects: | 1. Manufacturing unit direct,First high quality and reduce value. 2. Most of the products in stocks,we can ship the products to you in a limited time. three. Sincere services,if any issue soon after you recieved the merchandise,you should contact us freely,the greatest solution will be provided. |
Detailed Picture
Guest analysis
| Great feedback from CZPT ers is the optimum recognition of CZPT items. With the improvement of produced in CZPT , suppliers always describe their items with the greatest top quality, but I think the ideal products arrive from the recognition of CZPT ers. |
| A good analysis, across the distance in between distinct countries, to boost CZPT mutual CZPT and emotions. Truly great cooperation is mutual knowing and tolerance, just like the friendship in between CZPT and other countries. |
| I also hope to have an prospect to cooperate with you. Just like the evaluation given to me by my attendees, I imagine you will also have a excellent harvest and income. |
Associated Merchandise
| In order to make sure enough demand for attendees, we generate all versions of chains. What you need to have to do is to offer us with accurate numbers and pictures. I can make the exact same chain for you. |
Operate Shop
| Our manufacturing workshop addresses an region of more than 6000 sq. meters, much more than two hundred machines and much more than thirty kinds of growth and tests gear. And the skilled management and generation level in ZheJiang –Actual unique manufacturing unit in CZPT |
Top quality Manage
| Every single of CZPT chains will bear rigorous one hundred% guide take a look at, equipment test and anti rust therapy. Only through rigid screening can we do a greater top quality assurance and let visitors CZPT CZPT products much more. |
Buyers Endorsements & Exhibition
| Attendees from CZPT countries experienced arrive to visit my manufacturing unit and are very content with CZPT manufacturing stage and chain. They have managed a excellent cooperative relationship for a lot of many years. We also take part in ZheJiang Frankfurt CZPT Areas Exhibition and HangZhou Exhibition and so on.Each and every time we have new guests and new cooperation. |
Packaging
| As for packaging, we will CZPT ize or traditional packaging in accordance to CZPT ers’ demands. P. E bag + (antirust paper )+ box+Carton |
Our Certification
| Our merchandise have passed ISO 9001 and ISO 14001 certification,and Produced-in-China toughness manufacturing unit certification |
FAQ
Q1: How a lot of many years are your company in the autoparts market?
A: The business has been started for twenty a long time till now.
Q2: What are your key merchandise?
A: Our principal goods are all kinds of Transfer Scenario Chain&Timing Chain
Q3: The place are your organization?
A: We are located in HangZhou Town,HangZhou Town,ZheJiang Province, CZPT .
This autumn: Are you a factory or investing firm?
A: We are a real manufacturing facility with export licenses.
Q5: What is the MOQ?
A: Normaly, CZPT MOQ is 100pcs ,but distinct product may have the diverse MOQ.
Q6:How about the good quality of your sensors?
A: Our items have got the ISO9001 Certification. CZPT Normal is also welcome and CZPT
fulfilled. CZPT y merchandise will be analyzed before cargo. You are very welcome to pay a visit to CZPT manufacturing unit at your comfort.
Q7:How about the warrenty of your sensors?
A: All of CZPT sensors are with warrenty of 1 yr, for some sensors the warrenty CZPT extented to 2 many years.
Q8: What is the payment terms?
A: thirty% deposit just before production,70% balance before shipment.
Q9: Can your organization CZPT ize sensors?
A: Of course! You are quite welcome to CZPT ize sensors, but it is strongly advisable to give samples.
Find the roller chain at EP, which has a wider midsection plate to help have heavier loads on conveyor belts, wire rod devices, printing presses and many other industrial purposes. Roller chains are totally interchangeable and pre-lubricated to support reduce elongation. Choose single or riveted chains with zinc and aluminum coatings to help avoid rust and chemical corrosion.
china near me shop Pulley System Gym Belt Alternator Squat Rack Roller Wheels Timing Pulleys Chain Cable Commercial Power Rack Band Saw Machine Stainless Steel Wire manufacturers
Product Description
pulley system fitness center belt alternator squat rack roller wheels timing pulleys chain cable commercial CZPT rack band saw equipment stainless steel wire
Locate the roller chain at EP, which has a broader waist plate to aid carry heavier loads on conveyor belts, wire rod machines, printing presses and several other industrial applications. Roller chains are totally interchangeable and pre-lubricated to help lessen elongation. Decide on single or riveted chains with zinc and aluminum coatings to support avert rust and chemical corrosion.
Customized POM Sushi Conveyor Belt Sushi Chain Plastic Chain
CZPTized pom sushi conveyor belt sushi chain plastic chain
POM &lparFull-name&colon Polyformaldehyde&rpar&comma is a engineering plastics of non-facet-chain&comma higher density&comma large crystalline and linear polymer&comma which is praised “CZPT Metal”&comma and has comprehensive exceptional performances&comma such as&colon wear-resistance&comma higher hardness&comma anti-impregnant&comma great rigidity &lparTensile modulus of elasticity&rpar&comma chemical stability&comma isolation resistance and dimensional balance&period
POM has commonly applied in Car industries&comma digital and electrical merchandise&comma commodity&comma pipeline & fittings&comma specific equipment and so on&comma which can be alternatively of the bronze&comma Zinc&comma tin and other metals&time period
Except POM-H&comma is typically copolymerized with ethylene oxide collectively&comma in order to steer clear of the melting of POM material in the substantial temperature&time period POM-H has the greater performances than POM-C in its substantial crystalline&comma mechanical energy and rigidity&interval
And POM-C has the greater performances than POM-H in its low melting level&comma temperature security&comma fluxion characteristic and machining functionality&interval
Further far more&comma POM-H&plusPTFE&comma which is made from the Delrin POM Resin that maxed Teflon fiber symmetrically&comma has the minimal co-efficient of frication&comma great lubrication&comma use-resistance&comma non-creepage resistance&time period
Materials parameter table&colon
| Property | Product No&period | Device | POM-C | POM-H | POM-H&plusPTFE | |
| Mechanical Houses | 1 | Density | g&solcm3 | 1&period41 | one&period43 | 1&period50 |
| 2 | Water absorption&lpar23ºC in air&rpar | &percnt | &period20 | &period20 | &period17 | |
| three | Tensile strength | MPa | 68 | seventy eight | 55 | |
| four | Tensile pressure at crack | &percnt | 35 | 35 | ten | |
| five | Compressive pressure&lparat 2&percntnominal pressure&rpar | MPa | 35 | forty | 37 | |
| 6 | Charpy effect energy &lparunnotched&rpar | KJ&solm2 | &geq150 | &geq200 | &geq30 | |
| seven | Charpy effect power &lparnotched&rpar | KJ&solm2 | 7 | ten | three | |
| eight | Tensile modulus of elasticity | MPa | 3100 | 3600 | 3200 | |
| 9 | Ball indentation hardness | N&solmm2 | one hundred forty | one hundred sixty | a hundred and forty | |
| ten | Rockwell hardness | – | M84 | M88 | M84 | |
Our Service
one&period Rich industry experience since 1988&period
two&period Manufacture planning and processing service as per your demand&commaprofessional ODM & OEM provider
3&periodQuality warrent&commaif the pps tube can not operate in 3 thirty day period&commayou can return it to us
four&periodCertification&colonCZPT&commaSGS&periodRoHS&commaTesting Studies
Product technology
CNC machine&commaExtrusion&commaInjection&commaect&interval
Processing Equipment
CNC machining center&commaCNC lathes&commaMilling&commaInjection Molding Machine&commaExtruder&commaMoulding press
Packaging &Shipping
Packing in plastics bags&commawooden case&commapallet&commacontainer&commaect&period
Certification
Certification&colonISO&commaSGS&commaFDA&commaRoHS&commaTest report&commaect&time period
China Roller chain and sprocket manufacturer Drag chain and belt drive system in Lipetsk Russian Federation Industrial Standard Roller Narrow Series Welded Steel Transmission Chain with ce certificate top quality low price
We – EPG Group the biggest Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches.
Wonderful consideration has been paid out on environmental defense and energy conserving. We’ve We can provide a full-range of power transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes. created up our product selection to answer to the vastly various situations discovered in diverse industrial environments about the world. From hefty market to precision manufacturing, we operate with stop-customers in almost each and every market and have expert remedies which are confirmed to supply a unique overall performance edge for your software. Roller Chain Components Each chain is related at the finishes to type a total circle or chain loop by a master connecting website link. Cotter plates or spring clips keep the connecting link’s pins from functioning loose. INTRODUCTION
Scraper Chain for Grain Machines (Welded Metal Chain)
The welded steel chain is also referred to as scraper chain, and is broadly employed during the grain processing market. It is compatible with abrasive supplies, and largely supports lower speed load carrying. Moreover, it is able to operate in extreme environments with weighty du EPT and powerful impacts.
This sort of conveyor chain is composed of bended sidebars which are precisely the identical. The sidebars are related with each EPT right with out EPT types of website link plates. The chain url can be possibly odd or even amount. The sleeve and sidebars are welded collectively, which makes certain simple but durable construction.
In purchase to make scraper chains with improved top quality and prolonged provider life, we undertake computerized welding robots to weld the bushing and sidebar with each other. The precision products guarantees uniform and secure welding good quality. In the meantime, we carry out inspections according to the Good quality Manage StHangZhourd of international major roller chain producers. Moreover, in accordance to the proportion of 5%, our welded steel chain merchandise bear conduct damaging tests to guarantee accepted welding top quality. Our patented higher frequency induction heating remedy for the pins gives higher toughness while improving the wearing resistance.
| Chain No. | Pitch P (mm) | Outer diameter of bushing d1 (mm) | Diameter of pin d2 (max) (mm) | Height of sidebar h2 (max) (mm) | Inner width among modest ends b1 (mm) | Outer width in between little ends b2 (mm) | Thickness of sidebar T (mm) | Dimension of scraper | Tensile energy Q (min) (KN) | |||
| L1 (mm) | L2 (mm) | L3 (mm) | D (mm) | |||||||||
| DC200-one | seventy eight.one | 26.97 | 14.35 | 31.8 | 38.one | 57.4 | 6 | a hundred and ten | a hundred and fifty | one hundred seventy | 10 | 132 |
| DC250-1 | 78.one | 26.ninety seven | 14.35 | 31.eight | 38.1 | 57.four | six | a hundred thirty | one hundred eighty | 220 | 10 | 132 |
| WH82 | seventy eight.1 | 25.four | 14.29 | 32 | 31.eight | fifty seven | six.four | a hundred and fifty five | 235 | 265 | fourteen | a hundred.one |
| DC400.01 | 78.1 | 25.four | 14.29 | 32 | 31.8 | 57 | six.4 | a hundred and sixty | 320 | 350 | fourteen | a hundred.1 |
| DC315.01 | one zero one.6 | 36.five | 19.05 | 38.one | forty one.28 | sixty nine.9 | nine.5 | one hundred sixty five | 235 | 265 | fourteen | 300 |
| DC320-1 | 101.six | 31.75 | 19.05 | 38.1 | forty one.28 | 66.9 | 8 | 150 | a hundred ninety | 270 | twelve | three hundred |
| DC40W.01 | 101.6 | 36.5 | 19.05 | 38.one | forty one.28 | 69.nine | 9.5 | one hundred seventy | 280 | 310 | 14 | three hundred |
| DC400-one | 101.six | 31.seventy five | 19.05 | 38.1 | forty one.28 | 69.nine | nine.5 | a hundred and seventy | 290 | 330 | 12 | 300 |
| DC500-1 | 153.sixty seven | 44.forty five | 25.four | fifty.8 | fifty nine | ninety one.2 | 10 | 230 | 370 | 430 | fourteen | 356 |
| DC500-1-A | 153.sixty seven | forty four.45 | twenty five.4 | 50.eight | 66 | ninety eight | ten | 230 | 370 | 430 | 14 | 356 |
| DC500×254-one | 153.sixty seven | forty four.forty five | twenty five.four | fifty.eight | fifty nine | ninety one.2 | 10 | 224 | 374 | 434 | fourteen | 356 |
| WH132-498 | 153.67 | forty four.forty five | twenty five.05 | 50.8 | 76.two | 111.8 | twelve.7 | 201.4 | 441.four | 498 | thirteen | 378.1 |
| DC630-one | 153.sixty seven | 44.45 | twenty five.four | fifty.eight | 66 | ninety eight | 10 | 230 | 500 | 560 | 14 | 356 |
| DC660×254-one | 153.sixty seven | 44.45 | 25.4 | fifty.8 | sixty six | 102 | twelve | 224 | 534 | 594 | 14 | 511 |
| DC630×254-one | 153.67 | forty four.45 | 25.4 | fifty.eight | sixty six | 102 | 12 | 224 | 504 | 564 | fourteen | 511 |
| DC800-one | 153.67 | 44.forty five | twenty five.four | fifty.eight | sixty eight | 104 | twelve | 230 | 450/670 | 730 | fourteen | 511 |
| DC800×356-one | 153.sixty seven | forty four.45 | 28.75 | sixty | 73 | 109 | 12 | 226 | 450/674 | 734 | fourteen | 543 |
| DC1016-1 | 153.sixty seven | forty four.45 | 28.seventy five | sixty | 73 | 109 | twelve | 230 | 560/890 | 950 | 14 | 543 |
| Chain No. | Pitch P (mm) | Outer diameter of bushing d1 (mm) | Diameter of pin d2 (max) (mm) | Height of sidebar h2 (max) (mm) | Inner width in between little finishes b1 (mm) | Outer width amongst tiny finishes b2 (mm) | Thickness of sidebar T (mm) | Dimension of scraper | Tensile strength Q (min) (KN) | |||
| L1 (mm) | L2 (mm) | L3 (mm) | D (mm) | |||||||||
| DC400×203-1 | a hundred and one.6 | 31.75 | 19.05 | 38.1 | forty one.28 | sixty nine.nine | nine.five | 154 | 294 | 334 | twelve | three hundred |
| WH130×400 | 153.sixty seven | 44.45 | 25.two | 50.8 | 76.two | 111.eight | 12.7 | 230 | 350 | four hundred | fourteen | 378.1 |
| DC500×254 | 153.sixty seven | forty four.forty five | twenty five.4 | fifty.eight | 59 | 91.2 | 10 | 224 | 374 | 434 | fourteen | 356 |
| DC630×254 | 153.67 | forty four.forty five | 25.four | fifty.8 | 66 | 102 | 12 | 224 | 504 | 564 | fourteen | 511 |
| DC660×254 | 153.sixty seven | 44.45 | 25.4 | 50.eight | sixty six | 102 | twelve | 224 | 534 | 594 | 13 | 511 |
| DC762×254 | 153.sixty seven | 44.forty five | 28.seventy five | fifty.8 | seventy three | 109 | twelve | 226 | 636 | 696 | fourteen | 543 |
| DC800×254 | 153.sixty seven | forty four.forty five | 28.75 | 60 | seventy three | 109 | 12 | 226 | 450/674 | 734 | fourteen | 543 |
| DC1016-1 | 153.sixty seven | forty four.45 | 28.seventy five | 60 | 73 | 109 | twelve | 230 | 560/890 | 950 | 14 | 543 |
| Chain No. | Pitch P (mm) | Outer diameter of bushing d1 (mm) | Diameter of pin d2 (max) (mm) | Height of sidebar h2 (max) (mm) | Inner width amongst small finishes b1 (mm) | Outer width amongst modest finishes b2 (mm) | Thickness of sidebar T (mm) | Dimension of scraper | Tensile toughness Q (min) (KN) | |||
| L1 (mm) | L2 (mm) | L3 (mm) | D (mm) | |||||||||
| WH150 | 153.sixty seven | forty four.45 | 28.fifty seven | 63.five | 73 | 111.76 | 12.7 | 163.four | 193.four | 240 | 18 | 542 |
For much more than 20 a long time, we have centered on customized chains.
For more than twenty several years, We have done hundreds of distinct sorts of industrial chains.
So we have a prosperity of personalized chain expertise.
Right here are some of the versions of the chains.
The use of unique equipment manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our business and the outlined substitution components contained herein are not sponsored, accepted, or made by the OEM.
China Roller chain and sprocket manufacturer Nylon submerged belt conveyor China in Bouake Côte d’Ivoire Engineering CNC Cable Drag Chains with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox factory in China with 5 various branches.
It has established secure cooperation with several nicely known universities and institutes in china this sort of as, Zhejiang College, Jilin University, Complex committee of national chain push normal, Institute of national chain drive, Zhejiang software engineering materials institute, Huhan content defense institute and it cooperated to located China Initial Vehicle chain institute with Countrywide chain travel institute.ISO EPG will often adhere to it company spirit of being useful, progressive, successful and outstanding to make the best global transmission travel.9001 licensed company of precision roller chains. Types include one and multiple strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. engineering course chains & precision roller chains. Solitary strand chain, multi-strand chains, double pitch chains, corrosion resistant chains, self-lubricating chains, attachment chains, leaf chains, and specialty chains. Specification&colon
· Open up
· Minimal sound
· Large load resistant
· Chemical&comma h2o and temperature resistant
Solution description&colon
Software&colon
&lpar1&rparApplies in the situation the place reciprocating movement is utilised which has traction and safety to the constructed-in cable&comma tubing&comma the trachea and conduit&comma and so on
&lpar2&rpar Drag chain has been broadly utilised in the numerical management device equipment&comma digital equipments&comma stone equipment&comma glass machinery&comma the injection molding equipment&comma robots&comma chubby transportation equipments&comma computerized warehouses&comma and so on&period of time
Traits&colon
Mo EPT carriers have a rectangular cross part in which the cables lie in&period Cross bars together with the length of the carrier can be opened from the exterior&comma so that the cables can be effortlessly inserted and linked with plugs&interval
Inner separators in the carrier can separate the cables&interval Mounting brackets resolve the ends of the carrier to the equipment&interval Apart from&comma cable carriers usually only permit bending in one particular path&time period
In combination with rigid mounting of the finishes of the carrier&comma this can entirely stop the enclosed cables from flopping in undesired instructions and getting to be tangled or crushed&time period
It has extremely lovely look&comma so the item can make the equipment far more stunning&period of time
It is of high sturdiness&comma about 500 million reciprocating motions underneath standard problems&time period
It can be easily set up and dismantled&comma you ju EPT require a flat mouth screwdriver to open up it and dismantle it&interval
It can operate with higher speed&comma beneath typical circumstance&comma it can get to to 5m&sols
Functioning temperature&colon -40-250 centigrade
Substance&colon PA
Deal and Transportation&colon
The items are wrapped by plastic woven cloth&period In depth packing can be in accordance to your necessity&interval We will pack and ship the products carefully and produce it as quickly as possible&period
Our Service
Excellent Support&colon Our purpose is to give you with courteous&comma expedient&comma specialist service of the highe EPT caliber&time period Our service is accessible for 7 20-4&excl Cost-free samples can be geared up for our clientele&comma and the items you acquire would be as identical as the samples&time period We will hold standard relationship with our customers right after product sales and search ahead to more cooperation&period
Very good Quality&colon We are specialist in plastic hose discipline&time period We have stringent quality control system and very good popularity in mainland and worldwide markets&period
Fa EPT & Cheap Shipping and delivery&colon We have large low cost from the forwarder because of lengthy-time period cooperation&time period
No organization is modest enterprise&comma so tiny orders are also welcomed below&interval
Company information
Our organization is situated in Haihe Industrial Zone&comma ZheJiang &period of time With years’ encounter&comma we are now a specialist company of industrial tubes and plastic items&period of time
Our primary goods are PVC metal wire hose&comma PVC lay flat hose&comma PVC suction hose&comma obvious PVC hose&comma PVC backyard garden hose&comma PVC fire hose&comma PVC polyester reinforced hose&comma PVC substantial force hose&comma adaptable air duct&comma TPU metal wire hose&comma PA&comma PE Conduits&comma drag chains&comma and so forth&period of time We have innovative gear for manufacturing and testing as nicely as a lively younger elite staff&period
70&percnt of our items are for export&period of time We have set up secure trade interactions with the businesses from the United States&comma Germany&comma Russia&comma Brazil&comma Egypt&comma the United Arab Emirates and Qatar&period Now we are growing our business to EPT nations around the world and regions&interval We have constantly adhered to the principle of “perfecting each detai EPT and serving you&comma creating a earn-earn reward by joint attempts”&period of time
If you have any questions&comma please truly feel totally free to make contact with us&interval
| Dimension | IH&lparmm&rpar | IW&lparmm&rpar | B&periodR&period&lparmm&rpar | H&lparmm&rpar |
| fifty five&ast95 | fifty five | 95 | a hundred twenty five&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | 2R&plus83 |
| fifty five&ast125 | fifty five | 125 | 125&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | |
| 55&ast150 | fifty five | one hundred fifty | 125&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | |
| fifty five&ast175 | 55 | 175 | 125&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | |
| fifty five&ast200 | 55 | 200 | 125&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | |
| 55&ast225 | 55 | 225 | a hundred twenty five&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 | |
| 55&ast250 | 55 | 250 | one hundred twenty five&bsol150&bsol175&bsol200&bsol225&bsol250&bsol300&bsol400&bsol500 |
The use of authentic tools manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the detailed substitution areas contained herein are not sponsored, accepted, or made by the OEM.
XL manufacturer made in China – replacement parts – in Brasilia Brazil Rubber Industrial Timing Belt From Ningbo with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
MOULD LI EPT OF XL
| Type | Pitch size | Enamel No | Width(mm) | Kind | Pitch duration | Enamel No | Width(mm) | Variety | Pitch size | Teeth No | Width(mm) |
| 50XL | 127 | twenty five | one hundred fifty | 178XL | 452.twelve | 89 | 450 | 336XL | 853.44 | 168 | 450 |
| 60XL | 152.four | thirty | a hundred and fifty | 180XL | 457.two | 90 | 430 | 340XL | 863.6 | one hundred seventy | 450 |
| 62XL | 157.48 | 31 | two hundred | 182XL | 462.28 | ninety one | 450 | 344XL | 873.76 | 172 | 450 |
| 64XL | 162.fifty six | 32 | 200 | 184XL | 467.36 | 92 | 450 | 348XL | 883.92 | 174 | 450 |
| 68XL | 172.72 | 34 | two hundred | 186XL | 472.44 | ninety three | 450 | 350XL | 889 | 175 | 450 |
| 70XL | 177.8 | 35 | a hundred and fifty | 188XL | 477.fifty two | 94 | 450 | 352XL | 894.08 | 176 | 450 |
| 72XL | 182.88 | 36 | 200 | 190XL | 482.6 | 95 | 450 | 356XL | 904.24 | 178 | 450 |
| 74XL | 187.ninety six | 37 | two hundred | 192XL | 487.sixty eight | 96 | 450 | 360XL | 914.four | a hundred and eighty | 450 |
| 76XL | 193.04 | 38 | 150 | 194XL | 492.76 | 97 | 450 | 362XL | 919.48 | 181 | 450 |
| 78XL | 198.12 | 39 | one hundred fifty | 196XL | 497.84 | 98 | 450 | 364XL | 924.56 | 182 | 450 |
| 80XL | 203.two | forty | a hundred and fifty | 198XL | 502.92 | ninety nine | 450 | 370XL | 939.8 | 185 | 450 |
| 82XL | 208.28 | forty one | 200 | 200XL | 508 | 100 | 450 | 376XL | 955.four | 188 | 450 |
| 84XL | 213.36 | 42 | two hundred | 202XL | 513.08 | one hundred and one | 450 | 380XL | 965.two | one hundred ninety | 450 |
| 86XL | 218.forty four | 43 | 200 | 204XL | 518.sixteen | 102 | 450 | 382XL | 970.28 | 191 | 450 |
| 88XL | 223.fifty two | 44 | 200 | 206XL | 523.24 | 103 | 450 | 384XL | 975.36 | 192 | 450 |
| 90XL | 228.6 | 45 | two hundred | 208XL | 528.32 | 104 | 450 | 390XL | 990.6 | 195 | 450 |
| 92XL | 233.68 | forty six | 200 | 210XL | 533.four | one zero five | 450 | 392XL | 995.sixty eight | 196 | 450 |
| 94XL | 238.76 | 47 | 200 | 212XL | 538.48 | 106 | 450 | 396XL | 1005.eighty four | 198 | 450 |
| 96XL | 243.eighty four | forty eight | two hundred | 214XL | 543.56 | 107 | 450 | 400XL | 1016 | two hundred | 450 |
| 98XL | 248.ninety two | forty nine | two hundred | 216XL | 548.sixty four | 108 | 450 | 412XL | 1046.forty eight | 206 | 450 |
| 100XL | 254 | fifty | two hundred | 218XL | 553.72 | 109 | 450 | 414XL | 1051.fifty six | 207 | 450 |
| 102XL | 259.08 | fifty one | 200 | 220XL | 558.eight | a hundred and ten | 450 | 420XL | 1066.8 | 210 | 450 |
| 104XL | 264.sixteen | fifty two | 200 | 222XL | 563.88 | 111 | 450 | 424XL | 1076.9 | 212 | 450 |
| 106XL | 269.24 | 53 | two hundred | 224XL | 568.ninety six | 112 | 450 | 430XL | 1092.two | 215 | 450 |
| 108XL | 274.35 | fifty four | two hundred | 226XL | 574.04 | 113 | 450 | 432XL | 1097.28 | 216 | 450 |
| 110XL | 279.four | fifty five | 200 | 228XL | 579.13 | 114 | 450 | 438XL | 1112.52 | 219 | 450 |
| 112XL | 284.forty eight | fifty six | 200 | 230XL | 584.two | a hundred and fifteen | 450 | 440XL | 1117.six | 220 | 450 |
| 114XL | 289.56 | 57 | 200 | 234XL | 594.36 | 117 | 450 | 450XL | 1143 | 225 | 450 |
| 116XL | 294.64 | fifty eight | two hundred | 236XL | 599.forty four | 118 | two hundred | 460XL | 1168.four | 230 | 450 |
| 118XL | 299.72 | 59 | 200 | 238XL | 604.52 | 119 | 450 | 470XL | 1193.8 | 235 | 450 |
| 120XL | 304.8 | sixty | 450 | 240XL | 609.six | one hundred twenty | 450 | 480XL | 1219.two | 240 | 450 |
| 122XL | 309.88 | sixty one | 430 | 244XL | 619.76 | 122 | 450 | 490XL | 1244.6 | 245 | 450 |
| 124XL | 314.ninety six | sixty two | 200 | 246XL | 624.84 | 123 | 450 | 492XL | 1249.sixty eight | 246 | 450 |
| 126XL | 320.04 | sixty three | two hundred | 248XL | 629.ninety two | 124 | 450 | 496XL | 1259.eighty four | 248 | 450 |
| 128XL | 325.12 | 64 | 200 | 250XL | 635 | 125 | 450 | 498XL | 1264.ninety two | 249 | 450 |
| 130XL | 330.2 | sixty five | 450 | 254XL | 645.16 | 127 | 450 | 506XL | 1285.24 | 253 | 450 |
| 132XL | 335.28 | 66 | 200 | 260XL | 660.4 | one hundred thirty | 450 | 510XL | 1295.four | 255 | 450 |
| 134XL | 340.36 | 67 | 450 | 262XL | 665.forty eight | 131 | 450 | 514XL | 1305.fifty six | 257 | 450 |
| 136XL | 345.forty four | sixty eight | 450 | 264XL | 670.56 | 132 | 450 | 530XL | 1346.two | 265 | 450 |
| 138XL | 350.52 | sixty nine | 450 | 266XL | 675.sixty four | 133 | 450 | 540XL | 1371.six | 270 | 450 |
| 140XL | 355.6 | 70 | 450 | 270XL | 685.eight | a hundred thirty five | 450 | 564XL | 1432.fifty six | 282 | 450 |
| 142XL | 360.68 | 71 | 450 | 272XL | 690.88 | 136 | 450 | 570XL | 1447.eight | 285 | 450 |
| 144XL | 365.seventy six | seventy two | 450 | 274XL | 695.ninety six | 137 | 450 | 580XL | 1473.two | 290 | 450 |
| 146XL | 370.84 | seventy three | two hundred | 276XL | 701.04 | 138 | 450 | 592XL | 1503.68 | 296 | 450 |
| 148XL | 375.ninety two | seventy four | 450 | 280XL | 711.2 | 140 | 450 | 600XL | 1524 | three hundred | 450 |
| 150XL | 381 | seventy five | 450 | 282XL | 716.28 | 141 | 450 | 616XL | 1564.sixty four | 308 | 450 |
| 152XL | 386.08 | 76 | two hundred | 288XL | 731.52 | a hundred and forty four | 450 | 624XL | 1584.ninety six | 312 | 450 |
| 154XL | 391.16 | seventy seven | 450 | 290XL | 736.six | 145 | 450 | 630XL | 1600.two | 315 | 450 |
| 156XL | 396.24 | 78 | 450 | 296XL | 751.eighty four | 148 | 450 | 648XL | 1645.ninety two | 324 | 250 |
| 158XL | 401.32 | seventy nine | 450 | 300XL | 762 | one hundred fifty | 450 | 670XL | 1701.8 | 335 | 380 |
| 160XL | 406.four | 80 | 450 | 304XL | 772.sixteen | 152 | 450 | 686XL | 1742.forty four | 343 | 450 |
| 162XL | 411.forty eight | 81 | 450 | 310XL | 787.four | 155 | 450 | 700XL | 1778 | 350 | 380 |
| 164XL | 416.56 | 82 | 450 | 314XL | 797.56 | 157 | 450 | 720XL | 1828.8 | 360 | 380 |
| 166XL | 421.sixty four | 83 | 450 | 316XL | 802.sixty four | 158 | 450 | 736XL | 1869.forty four | 368 | 380 |
| 168XL | 426.seventy two | 84 | 450 | 320XL | 812.eight | 160 | 450 | 788XL | 2001.fifty two | 394 | 380 |
| 170XL | 431.8 | 85 | 450 | 322XL | 817.88 | 161 | 450 | 828XL | 2103.12 | 414 | 380 |
| 172XL | 436.88 | 86 | 450 | 326XL | 828.04 | 163 | 450 | 860XL | 2184.4 | 430 | 380 |
| 174XL | 441.96 | 87 | 450 | 330XL | 838.two | a hundred sixty five | 450 | 900XL | 2286 | 450 | 380 |
| 176XL | 447.04 | 88 | 430 | 332XL | 843.28 | 166 | 450 | 1571XL | 2590.eight | 510 | 380 |
Our Firm:
HangZhou Huixin Synchronous Belt Co., Ltd. covers an location of 20 thousand sqm with a far more investment decision of twenty million Yuan RMB. It owns world’s sophisticated belt & pulley creation system. It organizes manufacture according to the mo EPT perfect production method mo EPT superb uncooked materia EPT & auxiliary resources and by adopting nationwide regular, intercontinental specifications and abroad innovative criterion. At present we have much more than 30 manner EPT and 2000 specifications. The goods sell to thirty domestic provinces, cities, autonomous areas, thousands of consumers & models, and also export to The us, Europe, southea EPT Asia and so on international nations.
The business persists in the objective of “prosper organization by higher-tech”. It carries forward Huixin spirits of “organization & indomitable, building & modern, be bold in reaching very first-class”. It wholeheartedly serves wide buyers by its fantastic EPT top quality, reasonable price and excellent provider.
Products Type
one. T kind tooth industrial rubber synchronous belt
| Variety | Pitch | Tooth top | Belt thickness | Angle |
| MXL | two.032 | .51 | 1.14 | forty |
| XXL | three.a hundred seventy five | .76 | 1.52 | 50 |
| XL | 5.080 | 1.27 | two.thirty | fifty |
| L | nine.525 | 1.ninety one | 3.sixty | 40 |
| H | 12.70 | two.29 | four.thirty | forty |
| XH | 22.225 | six.35 | 11.twenty | 40 |
| XXH | 31.750 | 9.53 | fifteen.70 | 40 |
| T2.5 | 2.five | .seven | 1.thirty | forty |
| T5 | five | 1.two | 2.twenty | 40 |
| T10 | ten | 2.fifty | four.fifty | 40 |
| T20 | 20 | 5.00 | eight.00 | 40 |
| AT5 | 5 | 1.20 | 2.70 | 50 |
| AT10 | 10 | 2.fifty | 5.00 | fifty |
| AT20 | 20 | 5.00 | 8.00 | fifty |
two. Arc tooth industrial rubber synchronous belt
| Equipment code | Variety | Pitch | Tooth peak | Belt thickness |
| HTD | 3M | three | 1.22 | 2.forty |
| 5M | five | 2.06 | 3.80 | |
| 8M | eight | 3.36 | six.00 | |
| 14M | 14 | six.02 | ten.00 | |
| 20M | 20 | 8.forty | thirteen.20 | |
| STPD/STS | S2M | two | .seventy six | 1.36 |
| S3M | 3 | 1.14 | 1.90 | |
| S4.5M | four.5 | 1.seventy one | 2.eighty one | |
| S5M | five | one.91 | 3.forty | |
| S8M | eight | three.05 | five.30 | |
| S14M | 14 | 5.thirty | ten.twenty | |
| RPP/HPPD | P2M | two | .76 | one.36 |
| P3M | three | 1.15 | 1.ninety | |
| P5M | five | 1.95 | 3.50 | |
| P8M | 8 | three.20 | 5.50 | |
| P14M | fourteen | 6.00 | ten. |
Raw materials
one.Belt:neoprene (CR) as the primary raw materia EPT (imported from Japan)
2.Skeleton materials:glass fiber (imported from Japan)
three.Tooth surface: nylon 66 large spandex
Traits:
1.Anti-cracking homes
two.Ozone outstanding performance
3.Anti-growing older
four.Heat resistance
5.Oil resistance
six.Abrasion-resistant
seven.Tiny initial tension
eight.Accurate transmission ratio and with no slip
Functions:
one.With synchronous belt push is the use of tooth and tooth meshing with the impetus to go a new variety of transmission method
two.With exact synchronous transmission purpose, do not beed lubrication and so slip,no pollution, considerably less noise, transmission performance of .98, the speed ratio selection up to 1.ten, allowing wire speed up to fifty/seconds, the transmission price from a number of hundred watts to the hundreds of kilowatts, suitable for multiple axis generate
Our Service
* Inquiry and consulting assist. * Sample screening support
* See our Factory. * Service after product sales
* Fa EPT Shipping * Dependable cargo
Contect Us:
Insert: No.288, Shengshan Street(west), Shengshan City, HangZhou City, ZHangZhoug, China
Tel: +86~571-8822571/8822 0571 -63542128
Cellular: 155718571
For much more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the listed substitute elements contained herein are not sponsored, accredited, or created by the OEM.
SMT sales made in China – replacement parts – in Taif Saudi Arabia Dek Belt 187273 187274 with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
SMT DEK BELT 187273 187274
DEK Gas spring 186206
Front Include DAMPER, 210N ( TXT ) DEK 140583
Camera MOUNT DEK 140127
Digital camera PLUG BRACKET DEK 119641
SMPSU, 650W Vast Assortment I/P (FASTON Phrases) (TXT) DEK 16571
PSU^COSEL^450W MULTI O/P^(UL SEE Textual content 3) DEK 185312
BOM^^SOLVENT PUMP ASSY DEK 183390/183227/191088
BOM^^Kit^BAUMER SENSOR Substitution^ DEK 181563/114758
Digicam, MOUNT DEK 145230
BOM^CABLE^CRIMPED ASSEMBLY^RAILS^ASM DEK 177055
BRG.Cease BRKT. 113163
FITTING, PNEUMATIC ELBOW MINIATURE, OD4MM x M5 THD DEK 107265
TOOLING PIN, MAGNETIC, 81mm, S EPT DIA. DEK 15715
FITTING^AIR^UNION^INLINE 6MM (TXT) DEK 195716
SOLENOID VALVE 5 PORT 2 Place DEK 165431
BOARD Stop DEK119673 Digicam, MOUNT DEK145230 Eco-friendly DEK 145011
Picture SENSOR (SUNX) DEK 112246
Image SENSOR, SUNX DEK 109239
OPTO SENSOR DEK 1 0571 8
SENSOR^^FORK^4W – OMRON EE-SX675(TXT) DEK 191650
SENSOR^PHOTOELECTRIC DIFFUSE FHDK 14N5101/S35A DEK 183388 USC SOLVENT SOLENOID VALVE LOOM BOM ( TXT ) DEK 146111
DRAG CHAIN, Digicam X EPT DEK 156571
DRAG CHAIN, Camera Y EPT Y DEK 16571
CYLINDER^PNEUMATIC^COMPACT^12X10 DEK 158921
Unusual EARTH POT Sort MAGNET DEK 1 0571 three
BOM^LOOM^Camera X ^MOTOR PWR DEK 191238
DEK BELT :
TIMING DEK 119176
BELT ,TIMING DEK G1237
BELT ,TIMING DEK G1212
BELT ,TIMING DEK G1296
BELT ,TIMING DEK G1140
BELT ,TIMING DEK G4915
BELT^^2MM X 816 EPT ANTISTATIC^ DEK 178448 Transportation BELT DEK 165520
‘X’ AXIS TIMING BELT DEK 145518
Growing Table BELT DEK 145099
BELT,TIMING DEK 15718
BELT ,TIMING DEK 1 0571 nine
BELT , TIMING ‘Y’ AXIS, MATCHED PAIR DEK 145515
BELT ,TIMING DEK 119175
BELT ,TIMING DEK 129097
BELT (TIMING) DEK 101173
BELT (TIMING) DEK G4952
BELT ,TIMING DEK 107058
BELT ,TIMING DEK 119343 Transport BELT, 265, 3mm One (JOINED) DEK 122571
Transportation BELT, 3mm ( TXT ) DEK G4957 TIMING BELT, CARRIAGE DEK 156039
BELT TIMING Y MOTOR DEK 145510 DEK STOPPER ARM DEK DEK 156281
EXTRUSION ASSEMBLY (520 LG) DEK DEK 157679
EXTRUSION ASSEMBLY (four hundred LG) DEK DEK 157678
EXTRUSION ASSEMBLY (three hundred LG) DEK DEK 157677
CASSETTE Sort MANIFOLD^5/2 VALVE DEK 188760
CASSETTE Sort MANIFOLD^3/2/Twin VALVE 188759
Generate BELT^RAIL WIDTH DEK 185938
Travel BELT^Table Elevate DEK 185934
DEK Q-250D Covers System Swap LOOM BOM DEK DEK 163512
BELT, TIMING (16T10/1970), PAIR DEK 129250
BELT, TIMING (16T10/2350) DEK 129268
PRINT CARRIAGE MOTOR ( TXT ) DEK 133126
X’ Digital camera MOTOR DEK 133127
Camera ‘X’ MOTOR AT/20′ / DEK 145817
Digicam ‘Y’ MOTOR (WITH CONNECTORS) DEK 133128
Desk Lift MOTOR DEK 133129
ACTUATOR “X”REAR LOOM BOM(TXT) DEK 119715
Y’ Equipment PULLEY DEK 145511
BELT^TIMING ‘Y’ TRANSFER ( TXT ) DEK 145513/157936
REAR DAMPER, 235N DEK 140584
Travel BELT^PRINT CARRIAGE^ (TXT) DEK 185935
BELT^FLAT^ESD^NON-FRAYING DEK 178310
BOM^LIQUID Level SENSOR^SOLVT TANK^USC ( TXT ) DEK 181161
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original gear manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the outlined substitute areas contained herein are not sponsored, approved, or made by the OEM.