INTRODUCTION
Offset Url Chain for Sugar Industry
The offset link chain is created with higher abrasion, effect, and corrosion resistance to satisfy the application needs in sugar making sector. Its facet plates are bended but with paralleled ends. Both very hot bending and chilly bending methods can be used for side plate processing. The adoption of innovative bending die, coupled with enhanced quality inspection, makes sure the bending of facet plates will come CZPT cracks. Therefore, the offset sidebar chain won’t crack effortlessly below hefty load circumstances.
Produced employing stainless steel and alloy metal components, our offset link chain for sugar market provides bare minimum tensile toughness choices amongst 250 and 900KN, and rated operating load alternatives from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 0571 three all avaliable
| Chain No. | Pitch P (mm) | Inner width of slim end b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile strength Q (min) (KN) | Rated working load (KN) | Weight per meter q (kg/m) | |||
| d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
| *#SS100D | 100 | 33.27 | 33.27 | seventeen.27 | 38.four | 48.six | 44.five | 8 | two hundred | seventeen.8 | ten.47 |
| DC 1125 | one hundred and one.six | 32.6 | fifty.8 | 17.five | 37.9 | 45 | fifty.eight | seven.nine | 210 | 18.26 | |
| *DC D2184 | 152.4 | 34.9 | 76.two | 22.23 | 43.9 | fifty one.two | fifty.eight | nine.5 | 355.6 | 31.six | seventeen.7 |
| DC W1796 | 152.4 | 37.8 | 69.85 | 22.23 | 44.2 | fifty two.nine | 57.2 | 9.5 | 444.five | 31.6 | eighteen.fifty nine |
| DC 0571 3 | 152.4 | 38 | 76.2 | 23.eighty three | 47.1 | fifty four.nine | sixty.3 | 10.three | 622.3 | 36.one | 21.83 |
| DC 8184 | 203.two | forty five.9 | 88.9 | twenty five.4 | fifty nine.7 | sixty five.8 | 69.nine | 12.seven | 742.4 | forty seven.6 | 29.2 |
| DC C2614 | 304.eight | 69.85 | sixty three.five | 31.75 | 78.five | 84.5 | 88.9 | fifteen.9 | a thousand | eighty four.5 | 33.68 |
