Plant for Bottling Drinking Water to Complete Chain

Plant for Bottling Drinking Water to Complete Chain

Pure H2o Filling Products and Filling Production Line

A total h2o creation line gear consists of:
– H2o remedy
– Blow molding machine
– Unscrambler
– Air conveyor
– Rinsing-filling-capping 3-in-1 monoblock
– Sleeve / OPP labeler
– Air dryer, visible inspection, ink jet printer
– Shrink wrapper / wrap-spherical case packer
– Palletizer
– and so forth.

it can be applied to the production of mineral drinking water, purified h2o, taste water and low alcoholic beverages, and many others. The drinking water filler equipment can be employed for distinct h2o filling line.
The whole device is primarily composed of rinser, filler and capper.

Major Characteristics
Automatic large high quality mineral/pure h2o producing equipment/plant–Rinser
The rotary wheel is a totally SUS304 stainless metal welded framework.
The device applies distinctive overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck placement, staying away from bottle mouth thread contamination induced by rubber gripper block of a classic bottle clamp. Created of SUS304 stainless steel, this bottle clamp is hygienic and resilient.
The substantial performance atomizing spay nozzle put in on bottle clamp is capable of cleaning any portion of bottle internal wall, and also will save rinsing h2o.
All sliding bushes of lifting gadget use Igus (Germany) anti-corrosion maintenance free of charge bearing.
The rinser is driven by driving program positioned within device frame by means of equipment transmission.
Transfer CZPTwheel
Created of stainless steel of exceptional high quality.
Outfitted with bottle jam protection unit.

Automatic higher high quality mineral/pure drinking water making device/plant–Filler
Rotary wheel entirely manufactured of stainless steel SUS 304.
Gravity filling approach.
Filling valves are manufactured of SUS316L.
Filling valves are moderately structured with correct filling.
Filling stream can attain 200ml for each 2nd.
Bottles go up and down in the perform of cam by way of elevator, to method filling with get in touch with to bottle-mouth.
Amount of cylinder is managed with float-ball.
Filler is pushed via gears within the device body.
Link-wheels in rinser, filler and capper are transported in ringed assistance of bottle-neck

Automatic large good quality mineral/pure water creating machine/plant–Capper
Capper is the device with highest precision, impact very much with the security and reliability of the filling monoblock. Our capper characteristics as follows:

Cap distributing chute is geared up with reverse cap quit and reverse cap select-out system.
Cap distributing chute is equipped with a photocell change to cease the capper when there is no cap within the chute.
The capper is geared up with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce harm of caps.
A cap inspecting program is utilized to control on-off of elevator.

Automatic higher good quality mineral/pure h2o making equipment/plant–Machine Frame
The machine frame is a welded composition of large top quality carbon metal with the surface area anti-rust dealt with and coated. The device body is wrapped with stainless metal sheet (ANSI304).
Driving system of the three-in-1 Device is positioned beneath the machine table. 1 primary motor provides driving power through gear transmission.
The gear transmission method is an interleaved arrangement of metal gears and nylon gears.
The output shaft of the main motor is equipped overload defense to safe machine protection.
CZPTal Control
The electrical cupboard is created of coated carbon metal. From bottle infeed to bottle discharge, a PLC controls the completely computerized operation of the 3-in-one Unit.


Main technical parameters 
Product RFC-W 8-eight-three RFC-W14-twelve-five RFC-W16-16-5 RFC-W24-24-eight RFC-W32-32-ten RFC-W40-40-twelve RFC-W50-fifty-15 RFC-W60-60-fifteen
Capacity  2500  4000 6500 10000 15000 20000 24000 28000
Suitable bottle φ=fifty-100mm H=160 -330mm
two hundred-2500ml PET bottles 
Power  3.01kw 4.23kw  5.03kw 6.57kw eight.63kw 9.63kw 10.63kw 12.09kw
Dimension  1900×1150×2000 2100×1350×2300 2316×2016×2400 2700×2100×2600 3850×2400×2800 4250×2550×2900 5050×3200×2900 5350×3400×3000
Weight 1700kg 2200kg 3000kg 5000kg 6800kg 8500kg 11000kg 13000kg

Why Select Us
1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed, SS 316 is also CZPT.
2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
four. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The quality of the equipments reaches the international advanced level.
five. Advanced technologies, human-machine interface touch screen and PLC program control are
adopted in this machine.
6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
seven. Easy to operate, save the cost of workers.

Our Companies
1 year quality warranty and supply spare parts at low cost for life span after sale. We keep the original 
drawings of spare parts, so it can match with the rest part of machine.
2. 24 hours/365 days online technical service.
3. Training offered


Plant for Bottling Drinking Water to Complete Chain